Ag cloí le do chreideamh maidir le “Réitigh ardchaighdeáin a chruthú agus cairde a ghiniúint le daoine ó gach cearn den domhan”, cuirimid spéis na gcustaiméirí i gcónaí i dtús báire maidir le Briseoir Ciorcaid Cás Múnlaithe 4pholach Askm1-630A Síneach mórdhíola/MCCB, Chun an margadh a leathnú níos fearr, tugaimid cuireadh ó chroí do dhaoine aonair agus do sholáthraithe uaillmhianacha páirt a ghlacadh mar ghníomhaire.
Ag cloí le do chreideamh maidir le “Réitigh ardchaighdeáin a chruthú agus cairde a ghiniúint le daoine ó gach cearn den domhan”, cuirimid spéis na gcustaiméirí i gcónaí chun tosaigh.MCCB na Síne agus Briseoir Ciorcaid Cás MúnlaitheGo dtí seo, is féidir ár dtáirge a bhaineann le printéir dtg a4 a thaispeáint i bhformhór na dtíortha iasachta chomh maith le cathracha móra, a bhfuil tóir orthu mar gheall ar thrácht spriocdhírithe. Creidimid go láidir go bhfuil an cumas againn anois táirgí sásta a chur ar fáil duit. Tá fonn orainn iarratais ar do chuid earraí a bhailiú agus comhpháirtíocht fhadtéarmach a chruthú. Geallaimid dáiríre: An caighdeán céanna, an praghas níos fearr; an praghas céanna, an caighdeán níos airde.
Cuirtear briseoir ciorcaid mhúnlaithe sraith RDM5 i bhfeidhm ar chiorcad AC 50HZ, voltas inslithe 1000V, voltas oibre rátáilte suas le 690V, sruth rátáilte suas le 800A, a dháileann an chumhacht agus a chosnaíonn an ciorcad agus an fhoinse cumhachta i gcoinne ró-ualaigh, gearrchiorcad agus damáiste faoi bhun voltais. Go háirithe, nuair a bhíonn an sruth níos ísle ná 630A, is féidir leis an mótar a chosaint freisin. De ghnáth is annamh a bhíonn an briseoir inbhéartaithe agus ag tosú an mhótair. Is féidir an táirge a shuiteáil go hingearach agus go cothrománach.
1. Dearadh Dí-chomhthionóil Modúlach Painéil
2. Dearadh gabhálais boscaithe, suiteáil éasca
3. Cumas Briste Deiridh
4. Méid Dlúth
5. Tá an sruth briste gearrchiorcaid rátáilte Ics 10ka níos airde ná an cumas briste is airde atá ag an táirge traidisiúnta RDM1.
6. Saol seirbhíse marthanach RDM5 Ag cloí le do chreideamh maidir le "Réitigh ardchaighdeáin a chruthú agus cairde a ghiniúint le daoine ó gach cearn den domhan", cuireann muid spéis na gcustaiméirí i gcónaí i dtús báire maidir le Briseoir Ciorcaid Cás Múnlaithe 4pholach Askm1-630A Síneach mórdhíola/MCCB, Chun an margadh a leathnú níos fearr, tugaimid cuireadh ó chroí do dhaoine aonair agus do sholáthraithe uaillmhianacha páirt a ghlacadh mar ghníomhaire.
mórdhíola na SíneMCCB na Síne agus Briseoir Ciorcaid Cás MúnlaitheGo dtí seo, is féidir ár dtáirge a bhaineann le printéir dtg a4 a thaispeáint i bhformhór na dtíortha iasachta chomh maith le cathracha móra, a bhfuil tóir orthu mar gheall ar thrácht spriocdhírithe. Creidimid go láidir go bhfuil an cumas againn anois táirgí sásta a chur ar fáil duit. Tá fonn orainn iarratais ar do chuid earraí a bhailiú agus comhpháirtíocht fhadtéarmach a chruthú. Geallaimid dáiríre: An caighdeán céanna, an praghas níos fearr; an praghas céanna, an caighdeán níos airde.
| Parafrása | ||
| 1 | Trádmharc | |
| 2 | Múnla táirge | |
| 3 | Paraiméadair Theicniúla | |
| 4 | Caighdeánach | |
| 5 | Marc Deimhniúcháin CCC | |
| 6 | Ainm na Cuideachta | |
| 7 | Láimhseáil | |
| 8 | Scriú críochfoirt | |
| 9 | Cnaipe turais | |
| 10 | Clúdach | |
| 11 | Clúdach lár | |
| 12 | Poill gléasta gabhálais | |
| 13 | Bonn | |
Uachtarach
Cásáil
Lár
Píosa
Íochtarach
Cásáil
Glacann an táirge dearadh inslithe dúbailte-chiseal chun sábháilteacht úsáideoirí a fheabhsú.
· Tá gá le cumas briseadh 6kA le linn tairisceana agus tairiscintí,
Ní féidir le 4.5kA freastal ar riachtanais na n-amanna a thuilleadh
· Cumas briste 6kA comhsheasmhach uile-shraith, feidhmíocht níos fearr
· Freastal ar riachtanais na gcustaiméirí maidir le cumas briseadh 50A agus 63A
· Tá an tomhaltas cumhachta i bhfad faoi bhun an cheanglais chaighdeáin náisiúnta
Cineál 63/100/125
>Comh-Aireachta Caighdeánach: Fad sábháilteachta mór >Comh-Aireachta Neamhchaighdeánach: Coigilt ar chostas an chomh-aireachta
An briseadh gearrchiorcaid rátáilte
Tá na ICS reatha 10ka níos airde ná an
RDM1 is airde an táirge traidisiúnta
cumas briste, rud a fhágann go héifeachtach
feabhsaíonn an táirge
feidhmíocht sábháilteachta agus comhlíonann sé na
éileamh ard ó chustaiméirí.
| Sruth rátáilte grád fráma l nm (A) | 63 | 125 | 160 | 250 | 400 | 630 | 800 | ||||||||||||||||||
| Reatha rátáilte ln (A) | 10,16,20,25,32,40,50,63 | 10,16,20,25,32,40,50,63,80,100,125 | 63,80,100,125,160 | 100,125,160,180,200,225,250 | 200,225,250,315,350,400 | 400,500,630 | 630,700,800 | ||||||||||||||||||
| Pol (P) | 2,3,4 | 3,4/2,3,4/3,4 | 3,4/2,3,4 | 3,4/2,3,4/3,4 | 3,4 | ||||||||||||||||||||
| Minicíocht rátáilte (Hz) | 50 | ||||||||||||||||||||||||
| Voltas inslithe rátáilte Ui (V) | AC1000 | ||||||||||||||||||||||||
| Voltas seasmhaíochta impulse rátáilte (V) | 12000 | ||||||||||||||||||||||||
| Voltas oibre rátáilte Ue (V) | 400V | AC400/AC690 | |||||||||||||||||||||||
| Fad stua (mm) | ≤50 | ≤50 | ≤50 | ≤50 | ≤100 | ≤100 | ≤100 | ||||||||||||||||||
| Cumas briseadh gearrchiorcaid | L | M | S | L | M | H | S | L | M | S | L | M | H | L | M | H | S | L | M | H | L | M | H | ||
| Teorainn Rátáilte/Cumas briste rátáilte lcu/lcs (AC400V) | 25/15 | 35/25 | 25/18 | 50/35 | 70/50 | 100/70 | 25/18 | 35/23 | 50/35 | 25/18 | 50/35 | 70/50 | 100/70 | 50/50 | 70/70 | 100/75 | 50/35 | 50/50 | 70/70 | 100/75 | 65/65 | 75/75 | 100/75 | ||
| Teorainn Rátáilte/Cumas briste rátáilte lcu/lcs (AC690V) | / | / | / | 20/10. | 20/12. | 30/15. | / | 10/5. | 15/8. | / | 20/10. | 20/12. | 30/15 | 20/10. | 25/15 | 35/18 | / | 20/10. | 25/15 | 35/18 | 20/10. | 25/15 | 35/20 | ||
| Úsáid catagóir | A | ||||||||||||||||||||||||
| Comhlíontach le caighdeáin | IEC60947-2 GB/T14048-2 | ||||||||||||||||||||||||
| Oiriúnach do theocht an chomhshaoil oibre | -5℃+40℃ | ||||||||||||||||||||||||
| Saol leictreach (uaireanta) | 8000 | 7500 | |||||||||||||||||||||||
| Saol meicniúil (uaireanta) | 20000 | 20000 | 20000 | 20000 | 10000 | 10000 | 10000 | ||||||||||||||||||
| Scaoileadh shunt | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ||||||||||||||||||
| Scaoileadh faoi-voltais | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ||||||||||||||||||
| Teagmháil aláraim | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ||||||||||||||||||
| Teagmháil chúnta | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ||||||||||||||||||
2 pholl 3 pholl
4 cuaille Taobh
| Múnla táirge | Pol | Sreangú painéil tosaigh | Méid suiteála | Seasamh an chnaipe | ||||||||||||||||||
| L1 | L2 | L3 | L4 | L5 | L6 | W1 | W2 | W3 | H1 | H2 | H3 | H4 | H5 | H6 | K | a | b | d | L7 | L8 | ||
| RDM5-63L/M RDM5-125S/L | 2 | 130.0 | - | 116.5 | 85.0 | - | 49.5 | 50.0 | 11.0 | 25.0 | 83.0 | 71.0 | - | 57.0 | 24.5 | 24.5 | 18.5 | - | 111.0 | 3.5 | 17.0 | 20.0 |
| 3 | 130.0 | - | 116.5 | 85.0 | - | 49.5 | 75.0 | 11.0 | 50.0 | 83.0 | 71.0 | - | 57.0 | 24.5 | 24.5 | 18.5 | 25.0 | 111.0 | 3.5 | 16.5 | 20.0 | |
| 4 | 130.0 | - | 116.5 | 85.0 | - | 49.5 | 100.0 | 11.0 | 75.0 | 83.0 | 71.0 | - | 57.0 | 24.5 | 24.5 | 18.5 | 50.0 | 111.0 | 3.5 | 16.5 | 20.0 | |
| RDM5-125M/U | 2 | 152.0 | - | 132.0 | 88.0 | 31.0 | 52.0 | 62 | 14.5 | 30.0 | 109.5 | 96.0 | - | 82.0 | 28.5 | 28.5 | 18.0 | - | 129.0 | 4.5 | - | 6.5 |
| 3 | 152.0 | - | 132.0 | 88.0 | 31.0 | 52.0 | 92 | 14.5 | 60.0 | 110.0 | 96.0 | - | 82.0 | 28.5 | 28.5 | 18.0 | 30.0 | 129.0 | 4.5 | 22.0 | 15.5 | |
| 4 | 152.0 | - | 132.0 | 88.0 | 31.0 | 65.0 | 122.0 | 14.5 | 90.0 | 110.0 | 96.0 | - | 82.0 | 28.5 | 28.5 | 18.0 | 60.0 | 129.0 | 4.5 | 22.0 | 16.5 | |
| RDM5-160S/L/M | 2 | 150.0 | - | 133.0 | 88.0 | 31.0 | 52.0 | 62 | 14.5 | 30.0 | 93.0 | 79.0 | - | 65.0 | 23.5 | 23.5 | 22.0 | - | 129.0 | 3.5 | - | 16.5 |
| 3 | 150.0 | - | 133.0 | 88.0 | 31.0 | 52.0 | 92 | 14.5 | 60.0 | 93.0 | 79.0 | - | 65.0 | 23.5 | 23.5 | 22.0 | 30.0 | 129.0 | 3.5 | 22.0 | 15.5 | |
| 4 | 150.0 | - | 133.0 | 88.0 | 31.0 | 52.0 | 122.0 | 14.5 | 90.0 | 93.0 | 79.0 | - | 65.0 | 23.5 | 23.5 | 22.0 | 60.0 | 129.0 | 3.5 | 22.0 | 16.5 | |
| RDM5-250S/L | 2 | 165.0 | - | 145.5 | 102.0 | 33.0 | 53.0 | 75.0 | 14.0 | 35.0 | 96.0 | 76.0 | - | 67.0 | 23 | 23.0 | 25.0 | - | 126.0 | 4.5 | 2.5 | 15.5 |
| 3 | 165.0 | - | 145.5 | 102.0 | 33.0 | 53.0 | 107.0 | 14.0 | 70.0 | 96.0 | 76.0 | - | 67.0 | 23 | 23.0 | 25.0 | 35.0 | 126.0 | 4.5 | 42.5 | 5.5 | |
| 4 | 165.0 | - | 145.5 | 102.0 | 33.0 | 53.0 | 142.0 | 14.0 | 105.0 | 96.0 | 76.0 | - | 67.0 | 23 | 23.0 | 25.0 | 70.0 | 126.0 | 4.5 | 43.0 | 15.5 | |
| RDM5-250M/U | 2 | 165.0 | - | 145.0 | 102.0 | 53.0 | 53.0 | 75.0 | 14.0 | 55.0 | 112.5 | 94.0 | - | 85.0 | 22 | 22.0 | 24.0 | - | 126.0 | 4.5 | 2.5 | 15.5 |
| 3 | 165.0 | - | 145.0 | 102.0 | 33.0 | 53.0 | 107.0 | 14.0 | 70.0 | 115.0 | 94.0 | - | 85.0 | 23 | 23.0 | 23.0 | 35.0 | 126.0 | 4.5 | 42.5 | 15.5 | |
| 4 | 165.0 | - | 145.0 | 102.0 | 33.0 | 53.0 | 142.0 | 14.0 | 105.0 | 115.0 | 94.0 | - | 85.0 | 23 | 23.0 | 23.0 | 70.0 | 126.0 | 4.5 | 43.0 | 15.0 | |
| RDM5-400L/M/H RDM5-630S | 3 | 258.0 | 178.0 | 224.0 | 132.0 | 53.0 | 100.0 | 150.0 | 35.0 | 96.0 | 152.0 | 115.0 | 101.0 | 99.0 | 38 | 38.0 | 31.0 | 44.0 | 194.0 | 7.0 | 57.5 | 30.0 |
| 4 | 258.0 | 179.0 | 224.0 | 132.0 | 53.0 | 100.0 | 198.0 | 35.0 | 144.0 | 152.0 | 115.0 | 101.0 | 99.0 | 38 | 38.0 | 31.0 | 94.0 | 194.0 | 7.0 | 57.5 | 30.0 | |
| RDM5-630L/M/H | 3 | 270.0 | 185.0 | 235.5 | 146.0 | 52.5 | 100.0 | 182.0 | 35.5 | 116.0 | 158.0 | 119.0 | 106.0 | 103.0 | 45 | 43.0 | 41.0 | 58.0 | 200.0 | 7.0 | 58.0 | 32.0 |
| 4 | 270.0 | 185.0 | 235.5 | 146.0 | 52.5 | 100.0 | 240.0 | 35.5 | 174.0 | 158.0 | 119.0 | 106.0 | 103.0 | 45 | 43.0 | 41.0 | 116.0 | 200.0 | 7.0 | 58.0 | 31.5 | |
| RDM5-800L/M/H | 3 | 280.0 | 205.0 | 243.0 | 148.0 | 52.0 | 100.0 | 210.0 | 35.0 | 140.0 | 159.0 | 122.0 | 109.0 | 105.0 | 40.5 | 42.5 | 45.0 | 70.0 | 243.0 | 7.0 | 53.0 | 24.5 |
| 4 | 280.0 | 205.0 | 243.0 | 148.0 | 52.0 | 100.0 | 280.0 | 35.0 | 210.0 | 159.0 | 122.0 | 109.0 | 105.0 | 40.5 | 42.5 | 45.0 | 140.0 | 243.0 | 7.0 | 53.0 | 24.5 | |
| Cód méide | ||||
| (L11) | W3 | L9 | L10 | |
| RDM5-63L M RDM5-125S, L | 64 | 19 | 14 | 43 |
| RDM5-125M H RDM5-160S, LM | - | 23 | 24 | 40 |
| RDM5-250S.LMH | - | 23 | 30 | 44 |
| RDM5-400L, M, H RDM5-630S | - | 47 | 39 | 66 |
| RDM5-630L, M, H | - | 47 | 39 | 66 |
| RDM5-800L, M, H | - | 47 | 42 | 66 |
Méid oscailte painéil suiteála sreangaithe painéil chúl sraith RDM5
3 Chuaille 4 Chuaille
Cuma sreangaithe agus toisí suiteála painéil chúl sraith RDM5
RDM5- 125M/U 160,250 RDM5-400,630,800
Cuma sreangaithe cúil RDM5-125~800 agus méid oscailte pláta gléasta
| Múnla táirge | Cód méide | |||||||||
| H3 | H4 | D | W | L2 | d2 | A | B | C | d1 | |
| RDM5-125M H | 64 | 100 | M8 | 50 | 132 | 24 | 30 | 108 | 60 | 5.5 |
| RDM5-160L.M | ||||||||||
| RDM5-250L, M, H | 70 | 100 | M10 | 35 | 145 | 15 | 35 | 126 | 70 | 5.5 |
| RDM5-400L.M, H RDM5-630S | 71 | 105.5 | - | 48 | 2242 | 32 | 44 | 194 | 94 | 7 |
| RDM5-630L.M, H | 46 | 105 | - | 58 | 2346 | 37 | 58 | 200 | 116 | 7 |
| RDM5-800L,MH | 105 | 105 | - | 70 | 2436 | 48 | 70 | 243 | 70 | 7.5 |
Toisí painéil tosaigh breiseán sraith RDM5
Gléas cothrom
Toisí an bhriseoir ciorcaid painéil tosaigh breiseán RDM5-125~800
| Múnla táirge | Cód méide | |||||||||||||
| A | G | K | H | H | ₂ | Hs | L1 | L2 | AM | BM | ||||
| RDM5-125M H | 172 | 95 | 38.5 | 50.5 | 35 | 16.5 | 61 | 185 | 217 | M6 | M8 | |||
| RDM5-160L,M | ||||||||||||||
| RDM5-250L, M, H | 183 | 95 | 44 | 52 | 35 | 18 | 65 | 230 | 259 | M6 | M10 | |||
| RDM5-400L,M,H RDM5-630S | 276 | 170 | 53 | 79.5 | 67 | 18 | - | 322 | 352 | M6 | M10 | |||
| RDM5-630L,M,H | 299 | 163.5 | 67.5 | 84.5 | 65.5 | 20 | - | 368 | 397 | M8 | M12 | |||
| RDM5-80OL,M,H | 303 | 179 | 62 | 87.5 | 60.5 | 28 | 118 | 375 | 405 | M10 | M12 | |||
Méid an phoill sa phláta gléasta sreangaithe tosaigh breiseáin (is é X-XY-Y lár an bhriseoir ciorcaid)
Suiteáil bhíoma Gléas cothrom
Méid oscailte pláta gléasta sreangaithe tosaigh breiseán RDM5-125~800
| Múnla táirge | RDM5-125M.H RDM5-160L.M | RDM5-250L.M,H | RDM5-400L,M,H RDM5-630S | RDM5-630L,M,H | RDM5-800L,MH | |||||||||
| cuaille | 3 | 3 | 3 | 3 | 3 | |||||||||
| Méid oscailte an phláta gléasta (mm) | B | 66 | 70 | 115 | 90.5 | 90.5 | ||||||||
| B1 | 50 | 60 | - | - | 65 | |||||||||
| C | 60 | 64 | 135 | 144.5 | 144.5 | |||||||||
| C1 | 35 | 35 | - | - | 80 | |||||||||
| d | 6.5 | 6.5 | 6.5 | 8.5 | 11 | |||||||||
Toisí cúil phainéil breiseán sraith RDM5 agus toisí oscailte an phainéil gléasta
Toisí an bhriseoir ciorcaid painéil chúl breiseán RDM5-125~800
| Múnla táirge | Cód méide | ||||||||||
| A | F | G | K | H | H1 | H2 | H3 | H4 | AM | BM | |
| RDM5-125M H RDM5-160L M | 168 | 133 | 92 | 38 | 48 | 32.5 | 32.5 | 18 | 17 | M6 | M8 |
| RDM5-25OL, M, H | 186 | 144 | 95 | 45.5 | 49.5 | 33.5 | 34 | 15 | 17 | M6 | M8 |
| RDM5-400L, M, H RDM5-630S | 280 | 224 | 171 | 54.5 | 59.5 | 40 | 44 | 23.5 | 20 | M8 | M12 |
| RDM5-630L, M, H | 300 | 234 | 170 | 65 | 59 | 40 | 50 | 30 | 20 | M8 | M12 |
| RDM5-800L, M, H | 305 | 243 | 181 | 62 | 87 | 60 | - | - | 28 | M10 | M14 |
Méid an phoill sa phainéal suiteála sreangaithe breiseán cúil (is é X-XY-Y lár an bhriseoir ciorcaid)
Méid oscailte painéil suiteála sreangaithe cúil breiseán RDM5-125~800
| Múnla táirge | RDM5-125M.H RDMS-160L.M | RDM5-25OL,M,H | RDM5-400L, M, H RDM5-630S | RDM5-630L MH | RDM5-80OL. MH | |||||||
| cuaille | 3 | 4 | 3 | 4 | 3 | 4 | 3 | 4 | 3 | 4 | ||
| Méid oscailte an phláta gléasta (mm) | A | 91 | - | 107 | - | 149 | - | 182 | - | 210 | - | |
| A1 | - | 129 | - | 145 | - | 200 | - | 242 | - | 290 | ||
| B | 60 | - | 70 | - | 60 | - | 100 | - | 90 | - | ||
| B1 | - | 90 | - | 105 | - | 108 | - | 158 | - | 162 | ||
| C | 56 | 54 | 129 | 123 | 146 | |||||||
| D | 38 | 45.5 | 54.5 | 65 | 62 | |||||||
| E | 92 | 95 | 171 | 170 | 181 | |||||||
| d | 6.5 | 6.5 | 8.5 | 8.5 | 11 | |||||||
| Parafrása | ||
| 1 | Trádmharc | |
| 2 | Múnla táirge | |
| 3 | Paraiméadair Theicniúla | |
| 4 | Caighdeánach | |
| 5 | Marc Deimhniúcháin CCC | |
| 6 | Ainm na Cuideachta | |
| 7 | Láimhseáil | |
| 8 | Scriú críochfoirt | |
| 9 | Cnaipe turais | |
| 10 | Clúdach | |
| 11 | Clúdach lár | |
| 12 | Poill gléasta gabhálais | |
| 13 | Bonn | |
Uachtarach
Cásáil
Lár
Píosa
Íochtarach
Cásáil
Glacann an táirge dearadh inslithe dúbailte-chiseal chun sábháilteacht úsáideoirí a fheabhsú.
· Tá gá le cumas briseadh 6kA le linn tairisceana agus tairiscintí,
Ní féidir le 4.5kA freastal ar riachtanais na n-amanna a thuilleadh
· Cumas briste 6kA comhsheasmhach uile-shraith, feidhmíocht níos fearr
· Freastal ar riachtanais na gcustaiméirí maidir le cumas briseadh 50A agus 63A
· Tá an tomhaltas cumhachta i bhfad faoi bhun an cheanglais chaighdeáin náisiúnta
Cineál 63/100/125
>Comh-Aireachta Caighdeánach: Fad sábháilteachta mór >Comh-Aireachta Neamhchaighdeánach: Coigilt ar chostas an chomh-aireachta
An briseadh gearrchiorcaid rátáilte
Tá na ICS reatha 10ka níos airde ná an
RDM1 is airde an táirge traidisiúnta
cumas briste, rud a fhágann go héifeachtach
feabhsaíonn an táirge
feidhmíocht sábháilteachta agus comhlíonann sé na
éileamh ard ó chustaiméirí.
| Sruth rátáilte grád fráma l nm (A) | 63 | 125 | 160 | 250 | 400 | 630 | 800 | ||||||||||||||||||
| Reatha rátáilte ln (A) | 10,16,20,25,32,40,50,63 | 10,16,20,25,32,40,50,63,80,100,125 | 63,80,100,125,160 | 100,125,160,180,200,225,250 | 200,225,250,315,350,400 | 400,500,630 | 630,700,800 | ||||||||||||||||||
| Pol (P) | 2,3,4 | 3,4/2,3,4/3,4 | 3,4/2,3,4 | 3,4/2,3,4/3,4 | 3,4 | ||||||||||||||||||||
| Minicíocht rátáilte (Hz) | 50 | ||||||||||||||||||||||||
| Voltas inslithe rátáilte Ui (V) | AC1000 | ||||||||||||||||||||||||
| Voltas seasmhaíochta impulse rátáilte (V) | 12000 | ||||||||||||||||||||||||
| Voltas oibre rátáilte Ue (V) | 400V | AC400/AC690 | |||||||||||||||||||||||
| Fad stua (mm) | ≤50 | ≤50 | ≤50 | ≤50 | ≤100 | ≤100 | ≤100 | ||||||||||||||||||
| Cumas briseadh gearrchiorcaid | L | M | S | L | M | H | S | L | M | S | L | M | H | L | M | H | S | L | M | H | L | M | H | ||
| Teorainn Rátáilte/Cumas briste rátáilte lcu/lcs (AC400V) | 25/15 | 35/25 | 25/18 | 50/35 | 70/50 | 100/70 | 25/18 | 35/23 | 50/35 | 25/18 | 50/35 | 70/50 | 100/70 | 50/50 | 70/70 | 100/75 | 50/35 | 50/50 | 70/70 | 100/75 | 65/65 | 75/75 | 100/75 | ||
| Teorainn Rátáilte/Cumas briste rátáilte lcu/lcs (AC690V) | / | / | / | 20/10. | 20/12. | 30/15. | / | 10/5. | 15/8. | / | 20/10. | 20/12. | 30/15 | 20/10. | 25/15 | 35/18 | / | 20/10. | 25/15 | 35/18 | 20/10. | 25/15 | 35/20 | ||
| Úsáid catagóir | A | ||||||||||||||||||||||||
| Comhlíontach le caighdeáin | IEC60947-2 GB/T14048-2 | ||||||||||||||||||||||||
| Oiriúnach do theocht an chomhshaoil oibre | -5℃+40℃ | ||||||||||||||||||||||||
| Saol leictreach (uaireanta) | 8000 | 7500 | |||||||||||||||||||||||
| Saol meicniúil (uaireanta) | 20000 | 20000 | 20000 | 20000 | 10000 | 10000 | 10000 | ||||||||||||||||||
| Scaoileadh shunt | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ||||||||||||||||||
| Scaoileadh faoi-voltais | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ||||||||||||||||||
| Teagmháil aláraim | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ||||||||||||||||||
| Teagmháil chúnta | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ||||||||||||||||||
2 pholl 3 pholl
4 cuaille Taobh
| Múnla táirge | Pol | Sreangú painéil tosaigh | Méid suiteála | Seasamh an chnaipe | ||||||||||||||||||
| L1 | L2 | L3 | L4 | L5 | L6 | W1 | W2 | W3 | H1 | H2 | H3 | H4 | H5 | H6 | K | a | b | d | L7 | L8 | ||
| RDM5-63L/M RDM5-125S/L | 2 | 130.0 | - | 116.5 | 85.0 | - | 49.5 | 50.0 | 11.0 | 25.0 | 83.0 | 71.0 | - | 57.0 | 24.5 | 24.5 | 18.5 | - | 111.0 | 3.5 | 17.0 | 20.0 |
| 3 | 130.0 | - | 116.5 | 85.0 | - | 49.5 | 75.0 | 11.0 | 50.0 | 83.0 | 71.0 | - | 57.0 | 24.5 | 24.5 | 18.5 | 25.0 | 111.0 | 3.5 | 16.5 | 20.0 | |
| 4 | 130.0 | - | 116.5 | 85.0 | - | 49.5 | 100.0 | 11.0 | 75.0 | 83.0 | 71.0 | - | 57.0 | 24.5 | 24.5 | 18.5 | 50.0 | 111.0 | 3.5 | 16.5 | 20.0 | |
| RDM5-125M/U | 2 | 152.0 | - | 132.0 | 88.0 | 31.0 | 52.0 | 62 | 14.5 | 30.0 | 109.5 | 96.0 | - | 82.0 | 28.5 | 28.5 | 18.0 | - | 129.0 | 4.5 | - | 6.5 |
| 3 | 152.0 | - | 132.0 | 88.0 | 31.0 | 52.0 | 92 | 14.5 | 60.0 | 110.0 | 96.0 | - | 82.0 | 28.5 | 28.5 | 18.0 | 30.0 | 129.0 | 4.5 | 22.0 | 15.5 | |
| 4 | 152.0 | - | 132.0 | 88.0 | 31.0 | 65.0 | 122.0 | 14.5 | 90.0 | 110.0 | 96.0 | - | 82.0 | 28.5 | 28.5 | 18.0 | 60.0 | 129.0 | 4.5 | 22.0 | 16.5 | |
| RDM5-160S/L/M | 2 | 150.0 | - | 133.0 | 88.0 | 31.0 | 52.0 | 62 | 14.5 | 30.0 | 93.0 | 79.0 | - | 65.0 | 23.5 | 23.5 | 22.0 | - | 129.0 | 3.5 | - | 16.5 |
| 3 | 150.0 | - | 133.0 | 88.0 | 31.0 | 52.0 | 92 | 14.5 | 60.0 | 93.0 | 79.0 | - | 65.0 | 23.5 | 23.5 | 22.0 | 30.0 | 129.0 | 3.5 | 22.0 | 15.5 | |
| 4 | 150.0 | - | 133.0 | 88.0 | 31.0 | 52.0 | 122.0 | 14.5 | 90.0 | 93.0 | 79.0 | - | 65.0 | 23.5 | 23.5 | 22.0 | 60.0 | 129.0 | 3.5 | 22.0 | 16.5 | |
| RDM5-250S/L | 2 | 165.0 | - | 145.5 | 102.0 | 33.0 | 53.0 | 75.0 | 14.0 | 35.0 | 96.0 | 76.0 | - | 67.0 | 23 | 23.0 | 25.0 | - | 126.0 | 4.5 | 2.5 | 15.5 |
| 3 | 165.0 | - | 145.5 | 102.0 | 33.0 | 53.0 | 107.0 | 14.0 | 70.0 | 96.0 | 76.0 | - | 67.0 | 23 | 23.0 | 25.0 | 35.0 | 126.0 | 4.5 | 42.5 | 5.5 | |
| 4 | 165.0 | - | 145.5 | 102.0 | 33.0 | 53.0 | 142.0 | 14.0 | 105.0 | 96.0 | 76.0 | - | 67.0 | 23 | 23.0 | 25.0 | 70.0 | 126.0 | 4.5 | 43.0 | 15.5 | |
| RDM5-250M/U | 2 | 165.0 | - | 145.0 | 102.0 | 53.0 | 53.0 | 75.0 | 14.0 | 55.0 | 112.5 | 94.0 | - | 85.0 | 22 | 22.0 | 24.0 | - | 126.0 | 4.5 | 2.5 | 15.5 |
| 3 | 165.0 | - | 145.0 | 102.0 | 33.0 | 53.0 | 107.0 | 14.0 | 70.0 | 115.0 | 94.0 | - | 85.0 | 23 | 23.0 | 23.0 | 35.0 | 126.0 | 4.5 | 42.5 | 15.5 | |
| 4 | 165.0 | - | 145.0 | 102.0 | 33.0 | 53.0 | 142.0 | 14.0 | 105.0 | 115.0 | 94.0 | - | 85.0 | 23 | 23.0 | 23.0 | 70.0 | 126.0 | 4.5 | 43.0 | 15.0 | |
| RDM5-400L/M/H RDM5-630S | 3 | 258.0 | 178.0 | 224.0 | 132.0 | 53.0 | 100.0 | 150.0 | 35.0 | 96.0 | 152.0 | 115.0 | 101.0 | 99.0 | 38 | 38.0 | 31.0 | 44.0 | 194.0 | 7.0 | 57.5 | 30.0 |
| 4 | 258.0 | 179.0 | 224.0 | 132.0 | 53.0 | 100.0 | 198.0 | 35.0 | 144.0 | 152.0 | 115.0 | 101.0 | 99.0 | 38 | 38.0 | 31.0 | 94.0 | 194.0 | 7.0 | 57.5 | 30.0 | |
| RDM5-630L/M/H | 3 | 270.0 | 185.0 | 235.5 | 146.0 | 52.5 | 100.0 | 182.0 | 35.5 | 116.0 | 158.0 | 119.0 | 106.0 | 103.0 | 45 | 43.0 | 41.0 | 58.0 | 200.0 | 7.0 | 58.0 | 32.0 |
| 4 | 270.0 | 185.0 | 235.5 | 146.0 | 52.5 | 100.0 | 240.0 | 35.5 | 174.0 | 158.0 | 119.0 | 106.0 | 103.0 | 45 | 43.0 | 41.0 | 116.0 | 200.0 | 7.0 | 58.0 | 31.5 | |
| RDM5-800L/M/H | 3 | 280.0 | 205.0 | 243.0 | 148.0 | 52.0 | 100.0 | 210.0 | 35.0 | 140.0 | 159.0 | 122.0 | 109.0 | 105.0 | 40.5 | 42.5 | 45.0 | 70.0 | 243.0 | 7.0 | 53.0 | 24.5 |
| 4 | 280.0 | 205.0 | 243.0 | 148.0 | 52.0 | 100.0 | 280.0 | 35.0 | 210.0 | 159.0 | 122.0 | 109.0 | 105.0 | 40.5 | 42.5 | 45.0 | 140.0 | 243.0 | 7.0 | 53.0 | 24.5 | |
| Cód méide | ||||
| (L11) | W3 | L9 | L10 | |
| RDM5-63L M RDM5-125S, L | 64 | 19 | 14 | 43 |
| RDM5-125M H RDM5-160S, LM | - | 23 | 24 | 40 |
| RDM5-250S.LMH | - | 23 | 30 | 44 |
| RDM5-400L, M, H RDM5-630S | - | 47 | 39 | 66 |
| RDM5-630L, M, H | - | 47 | 39 | 66 |
| RDM5-800L, M, H | - | 47 | 42 | 66 |
Méid oscailte painéil suiteála sreangaithe painéil chúl sraith RDM5
3 Chuaille 4 Chuaille
Cuma sreangaithe agus toisí suiteála painéil chúl sraith RDM5
RDM5- 125M/U 160,250 RDM5-400,630,800
Cuma sreangaithe cúil RDM5-125~800 agus méid oscailte pláta gléasta
| Múnla táirge | Cód méide | |||||||||
| H3 | H4 | D | W | L2 | d2 | A | B | C | d1 | |
| RDM5-125M H | 64 | 100 | M8 | 50 | 132 | 24 | 30 | 108 | 60 | 5.5 |
| RDM5-160L.M | ||||||||||
| RDM5-250L, M, H | 70 | 100 | M10 | 35 | 145 | 15 | 35 | 126 | 70 | 5.5 |
| RDM5-400L.M, H RDM5-630S | 71 | 105.5 | - | 48 | 2242 | 32 | 44 | 194 | 94 | 7 |
| RDM5-630L.M, H | 46 | 105 | - | 58 | 2346 | 37 | 58 | 200 | 116 | 7 |
| RDM5-800L,MH | 105 | 105 | - | 70 | 2436 | 48 | 70 | 243 | 70 | 7.5 |
Toisí painéil tosaigh breiseán sraith RDM5
Gléas cothrom
Toisí an bhriseoir ciorcaid painéil tosaigh breiseán RDM5-125~800
| Múnla táirge | Cód méide | |||||||||||||
| A | G | K | H | H | ₂ | Hs | L1 | L2 | AM | BM | ||||
| RDM5-125M H | 172 | 95 | 38.5 | 50.5 | 35 | 16.5 | 61 | 185 | 217 | M6 | M8 | |||
| RDM5-160L,M | ||||||||||||||
| RDM5-250L, M, H | 183 | 95 | 44 | 52 | 35 | 18 | 65 | 230 | 259 | M6 | M10 | |||
| RDM5-400L,M,H RDM5-630S | 276 | 170 | 53 | 79.5 | 67 | 18 | - | 322 | 352 | M6 | M10 | |||
| RDM5-630L,M,H | 299 | 163.5 | 67.5 | 84.5 | 65.5 | 20 | - | 368 | 397 | M8 | M12 | |||
| RDM5-80OL,M,H | 303 | 179 | 62 | 87.5 | 60.5 | 28 | 118 | 375 | 405 | M10 | M12 | |||
Méid an phoill sa phláta gléasta sreangaithe tosaigh breiseáin (is é X-XY-Y lár an bhriseoir ciorcaid)
Suiteáil bhíoma Gléas cothrom
Méid oscailte pláta gléasta sreangaithe tosaigh breiseán RDM5-125~800
| Múnla táirge | RDM5-125M.H RDM5-160L.M | RDM5-250L.M,H | RDM5-400L,M,H RDM5-630S | RDM5-630L,M,H | RDM5-800L,MH | |||||||||
| cuaille | 3 | 3 | 3 | 3 | 3 | |||||||||
| Méid oscailte an phláta gléasta (mm) | B | 66 | 70 | 115 | 90.5 | 90.5 | ||||||||
| B1 | 50 | 60 | - | - | 65 | |||||||||
| C | 60 | 64 | 135 | 144.5 | 144.5 | |||||||||
| C1 | 35 | 35 | - | - | 80 | |||||||||
| d | 6.5 | 6.5 | 6.5 | 8.5 | 11 | |||||||||
Toisí cúil phainéil breiseán sraith RDM5 agus toisí oscailte an phainéil gléasta
Toisí an bhriseoir ciorcaid painéil chúl breiseán RDM5-125~800
| Múnla táirge | Cód méide | ||||||||||
| A | F | G | K | H | H1 | H2 | H3 | H4 | AM | BM | |
| RDM5-125M H RDM5-160L M | 168 | 133 | 92 | 38 | 48 | 32.5 | 32.5 | 18 | 17 | M6 | M8 |
| RDM5-25OL, M, H | 186 | 144 | 95 | 45.5 | 49.5 | 33.5 | 34 | 15 | 17 | M6 | M8 |
| RDM5-400L, M, H RDM5-630S | 280 | 224 | 171 | 54.5 | 59.5 | 40 | 44 | 23.5 | 20 | M8 | M12 |
| RDM5-630L, M, H | 300 | 234 | 170 | 65 | 59 | 40 | 50 | 30 | 20 | M8 | M12 |
| RDM5-800L, M, H | 305 | 243 | 181 | 62 | 87 | 60 | - | - | 28 | M10 | M14 |
Méid an phoill sa phainéal suiteála sreangaithe breiseán cúil (is é X-XY-Y lár an bhriseoir ciorcaid)
Méid oscailte painéil suiteála sreangaithe cúil breiseán RDM5-125~800
| Múnla táirge | RDM5-125M.H RDMS-160L.M | RDM5-25OL,M,H | RDM5-400L, M, H RDM5-630S | RDM5-630L MH | RDM5-80OL. MH | |||||||
| cuaille | 3 | 4 | 3 | 4 | 3 | 4 | 3 | 4 | 3 | 4 | ||
| Méid oscailte an phláta gléasta (mm) | A | 91 | - | 107 | - | 149 | - | 182 | - | 210 | - | |
| A1 | - | 129 | - | 145 | - | 200 | - | 242 | - | 290 | ||
| B | 60 | - | 70 | - | 60 | - | 100 | - | 90 | - | ||
| B1 | - | 90 | - | 105 | - | 108 | - | 158 | - | 162 | ||
| C | 56 | 54 | 129 | 123 | 146 | |||||||
| D | 38 | 45.5 | 54.5 | 65 | 62 | |||||||
| E | 92 | 95 | 171 | 170 | 181 | |||||||
| d | 6.5 | 6.5 | 8.5 | 8.5 | 11 | |||||||
