Bíonn ár bhfoireann i gcónaí i spiorad “feabhsúcháin leanúnaigh agus sármhaitheasa”, agus leis na táirgí ardchaighdeáin, praghas fabhrach agus seirbhísí maithe iar-díolacháin, déanaimid iarracht muinín gach custaiméara a bhuachan as an mBriseoir Ciorcaid Cás Múnlaithe MCCB MCCB-225 mórdhíola monarchan. Táimid ag tnúth le naisc dhearfacha agus tairbhiúla a thógáil leis na gnólachtaí ar fud an domhain. Cuirimid fáilte chroíúil romhat glaoch orainn chun tús a chur le plé ar conas is féidir linn é seo a chur i gcrích go héasca.
Bíonn ár bhfoireann i gcónaí i spiorad “feabhsúcháin leanúnaigh agus sármhaitheasa”, agus leis na táirgí den scoth, an praghas fabhrach agus na seirbhísí maithe iar-díolacháin, déanaimid iarracht muinín gach custaiméara a bhuachan.Briseoir Ciorcaid agus Briseoir Ciorcaid Chás MúnlaTugadh isteach sinn mar cheann de na soláthraithe déantúsaíochta agus onnmhairithe is mó atá ag fás dár réitigh. Tá foireann speisialtóirí oilte againn anois a thugann aire don cháilíocht agus don soláthar tráthúil. Más mian leat Dea-Cháilíocht ar phraghas maith agus seachadadh tráthúil, déan teagmháil linn.
Cuirtear briseoir ciorcaid mhúnlaithe sraith RDM5 i bhfeidhm ar chiorcad AC 50HZ, voltas inslithe 1000V, voltas oibre rátáilte suas le 690V, sruth rátáilte suas le 800A, a dháileann an chumhacht agus a chosnaíonn an ciorcad agus an fhoinse cumhachta i gcoinne ró-ualaigh, gearrchiorcad agus damáiste faoi bhun voltais. Go háirithe, nuair a bhíonn an sruth níos ísle ná 630A, is féidir leis an mótar a chosaint freisin. De ghnáth is annamh a bhíonn an briseoir inbhéartaithe agus ag tosú an mhótair. Is féidir an táirge a shuiteáil go hingearach agus go cothrománach.
1. Dearadh Dí-chomhthionóil Modúlach Painéil
2. Dearadh gabhálais boscaithe, suiteáil éasca
3. Cumas Briste Deiridh
4. Méid Dlúth
5. Tá an sruth briste gearrchiorcaid rátáilte Ics 10ka níos airde ná an cumas briste is airde atá ag an táirge traidisiúnta RDM1.
6. Saol seirbhíse marthanach RDM5 Bíonn ár bhfoireann i gcónaí i spiorad “feabhsúcháin leanúnaigh agus sármhaitheasa”, agus leis na táirgí ardchaighdeáin, praghas fabhrach agus seirbhísí maithe iar-díolacháin, déanaimid iarracht muinín gach custaiméara a bhuachan as Breaker Ciorcaid Cás Múnlaithe MCCB mórdhíola monarchan MCCB-225, Táimid ag tnúth le naisc dhearfacha agus tairbhiúla a thógáil leis na gnólachtaí ar fud an domhain. Cuirimid fáilte chroíúil romhat glaoch orainn chun tús a chur le plé ar conas is féidir linn é seo a thabhairt i gcrích go héasca.
Mórdhíol monarchanBriseoir Ciorcaid agus Briseoir Ciorcaid Chás MúnlaTugadh isteach sinn mar cheann de na soláthraithe déantúsaíochta agus onnmhairithe is mó atá ag fás dár réitigh. Tá foireann speisialtóirí oilte againn anois a thugann aire don cháilíocht agus don soláthar tráthúil. Más mian leat Dea-Cháilíocht ar phraghas maith agus seachadadh tráthúil, déan teagmháil linn.
| Parafrása | ||
| 1 | Trádmharc | |
| 2 | Múnla táirge | |
| 3 | Paraiméadair Theicniúla | |
| 4 | Caighdeánach | |
| 5 | Marc Deimhniúcháin CCC | |
| 6 | Ainm na Cuideachta | |
| 7 | Láimhseáil | |
| 8 | Scriú críochfoirt | |
| 9 | Cnaipe turais | |
| 10 | Clúdach | |
| 11 | Clúdach lár | |
| 12 | Poill gléasta gabhálais | |
| 13 | Bonn | |
Uachtarach
Cásáil
Lár
Píosa
Íochtarach
Cásáil
Glacann an táirge dearadh inslithe dúbailte-chiseal chun sábháilteacht úsáideoirí a fheabhsú.
· Tá gá le cumas briseadh 6kA le linn tairisceana agus tairiscintí,
Ní féidir le 4.5kA freastal ar riachtanais na n-amanna a thuilleadh
· Cumas briste 6kA comhsheasmhach uile-shraith, feidhmíocht níos fearr
· Freastal ar riachtanais na gcustaiméirí maidir le cumas briseadh 50A agus 63A
· Tá an tomhaltas cumhachta i bhfad faoi bhun an cheanglais chaighdeáin náisiúnta
Cineál 63/100/125
>Comh-Aireachta Caighdeánach: Fad sábháilteachta mór >Comh-Aireachta Neamhchaighdeánach: Coigilt ar chostas an chomh-aireachta
An briseadh gearrchiorcaid rátáilte
Tá na ICS reatha 10ka níos airde ná an
RDM1 is airde an táirge traidisiúnta
cumas briste, rud a fhágann go héifeachtach
feabhsaíonn an táirge
feidhmíocht sábháilteachta agus comhlíonann sé na
éileamh ard ó chustaiméirí.
| Sruth rátáilte grád fráma l nm (A) | 63 | 125 | 160 | 250 | 400 | 630 | 800 | ||||||||||||||||||
| Reatha rátáilte ln (A) | 10,16,20,25,32,40,50,63 | 10,16,20,25,32,40,50,63,80,100,125 | 63,80,100,125,160 | 100,125,160,180,200,225,250 | 200,225,250,315,350,400 | 400,500,630 | 630,700,800 | ||||||||||||||||||
| Pol (P) | 2,3,4 | 3,4/2,3,4/3,4 | 3,4/2,3,4 | 3,4/2,3,4/3,4 | 3,4 | ||||||||||||||||||||
| Minicíocht rátáilte (Hz) | 50 | ||||||||||||||||||||||||
| Voltas inslithe rátáilte Ui (V) | AC1000 | ||||||||||||||||||||||||
| Voltas seasmhaíochta impulse rátáilte (V) | 12000 | ||||||||||||||||||||||||
| Voltas oibre rátáilte Ue (V) | 400V | AC400/AC690 | |||||||||||||||||||||||
| Fad stua (mm) | ≤50 | ≤50 | ≤50 | ≤50 | ≤100 | ≤100 | ≤100 | ||||||||||||||||||
| Cumas briseadh gearrchiorcaid | L | M | S | L | M | H | S | L | M | S | L | M | H | L | M | H | S | L | M | H | L | M | H | ||
| Teorainn Rátáilte/Cumas briste rátáilte lcu/lcs (AC400V) | 25/15 | 35/25 | 25/18 | 50/35 | 70/50 | 100/70 | 25/18 | 35/23 | 50/35 | 25/18 | 50/35 | 70/50 | 100/70 | 50/50 | 70/70 | 100/75 | 50/35 | 50/50 | 70/70 | 100/75 | 65/65 | 75/75 | 100/75 | ||
| Teorainn Rátáilte/Cumas briste rátáilte lcu/lcs (AC690V) | / | / | / | 20/10. | 20/12. | 30/15. | / | 10/5. | 15/8. | / | 20/10. | 20/12. | 30/15 | 20/10. | 25/15 | 35/18 | / | 20/10. | 25/15 | 35/18 | 20/10. | 25/15 | 35/20 | ||
| Úsáid catagóir | A | ||||||||||||||||||||||||
| Comhlíontach le caighdeáin | IEC60947-2 GB/T14048-2 | ||||||||||||||||||||||||
| Oiriúnach do theocht an chomhshaoil oibre | -5℃+40℃ | ||||||||||||||||||||||||
| Saol leictreach (uaireanta) | 8000 | 7500 | |||||||||||||||||||||||
| Saol meicniúil (uaireanta) | 20000 | 20000 | 20000 | 20000 | 10000 | 10000 | 10000 | ||||||||||||||||||
| Scaoileadh shunt | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ||||||||||||||||||
| Scaoileadh faoi-voltais | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ||||||||||||||||||
| Teagmháil aláraim | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ||||||||||||||||||
| Teagmháil chúnta | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ||||||||||||||||||
2 pholl 3 pholl
4 cuaille Taobh
| Múnla táirge | Pol | Sreangú painéil tosaigh | Méid suiteála | Seasamh an chnaipe | ||||||||||||||||||
| L1 | L2 | L3 | L4 | L5 | L6 | W1 | W2 | W3 | H1 | H2 | H3 | H4 | H5 | H6 | K | a | b | d | L7 | L8 | ||
| RDM5-63L/M RDM5-125S/L | 2 | 130.0 | - | 116.5 | 85.0 | - | 49.5 | 50.0 | 11.0 | 25.0 | 83.0 | 71.0 | - | 57.0 | 24.5 | 24.5 | 18.5 | - | 111.0 | 3.5 | 17.0 | 20.0 |
| 3 | 130.0 | - | 116.5 | 85.0 | - | 49.5 | 75.0 | 11.0 | 50.0 | 83.0 | 71.0 | - | 57.0 | 24.5 | 24.5 | 18.5 | 25.0 | 111.0 | 3.5 | 16.5 | 20.0 | |
| 4 | 130.0 | - | 116.5 | 85.0 | - | 49.5 | 100.0 | 11.0 | 75.0 | 83.0 | 71.0 | - | 57.0 | 24.5 | 24.5 | 18.5 | 50.0 | 111.0 | 3.5 | 16.5 | 20.0 | |
| RDM5-125M/U | 2 | 152.0 | - | 132.0 | 88.0 | 31.0 | 52.0 | 62 | 14.5 | 30.0 | 109.5 | 96.0 | - | 82.0 | 28.5 | 28.5 | 18.0 | - | 129.0 | 4.5 | - | 6.5 |
| 3 | 152.0 | - | 132.0 | 88.0 | 31.0 | 52.0 | 92 | 14.5 | 60.0 | 110.0 | 96.0 | - | 82.0 | 28.5 | 28.5 | 18.0 | 30.0 | 129.0 | 4.5 | 22.0 | 15.5 | |
| 4 | 152.0 | - | 132.0 | 88.0 | 31.0 | 65.0 | 122.0 | 14.5 | 90.0 | 110.0 | 96.0 | - | 82.0 | 28.5 | 28.5 | 18.0 | 60.0 | 129.0 | 4.5 | 22.0 | 16.5 | |
| RDM5-160S/L/M | 2 | 150.0 | - | 133.0 | 88.0 | 31.0 | 52.0 | 62 | 14.5 | 30.0 | 93.0 | 79.0 | - | 65.0 | 23.5 | 23.5 | 22.0 | - | 129.0 | 3.5 | - | 16.5 |
| 3 | 150.0 | - | 133.0 | 88.0 | 31.0 | 52.0 | 92 | 14.5 | 60.0 | 93.0 | 79.0 | - | 65.0 | 23.5 | 23.5 | 22.0 | 30.0 | 129.0 | 3.5 | 22.0 | 15.5 | |
| 4 | 150.0 | - | 133.0 | 88.0 | 31.0 | 52.0 | 122.0 | 14.5 | 90.0 | 93.0 | 79.0 | - | 65.0 | 23.5 | 23.5 | 22.0 | 60.0 | 129.0 | 3.5 | 22.0 | 16.5 | |
| RDM5-250S/L | 2 | 165.0 | - | 145.5 | 102.0 | 33.0 | 53.0 | 75.0 | 14.0 | 35.0 | 96.0 | 76.0 | - | 67.0 | 23 | 23.0 | 25.0 | - | 126.0 | 4.5 | 2.5 | 15.5 |
| 3 | 165.0 | - | 145.5 | 102.0 | 33.0 | 53.0 | 107.0 | 14.0 | 70.0 | 96.0 | 76.0 | - | 67.0 | 23 | 23.0 | 25.0 | 35.0 | 126.0 | 4.5 | 42.5 | 5.5 | |
| 4 | 165.0 | - | 145.5 | 102.0 | 33.0 | 53.0 | 142.0 | 14.0 | 105.0 | 96.0 | 76.0 | - | 67.0 | 23 | 23.0 | 25.0 | 70.0 | 126.0 | 4.5 | 43.0 | 15.5 | |
| RDM5-250M/U | 2 | 165.0 | - | 145.0 | 102.0 | 53.0 | 53.0 | 75.0 | 14.0 | 55.0 | 112.5 | 94.0 | - | 85.0 | 22 | 22.0 | 24.0 | - | 126.0 | 4.5 | 2.5 | 15.5 |
| 3 | 165.0 | - | 145.0 | 102.0 | 33.0 | 53.0 | 107.0 | 14.0 | 70.0 | 115.0 | 94.0 | - | 85.0 | 23 | 23.0 | 23.0 | 35.0 | 126.0 | 4.5 | 42.5 | 15.5 | |
| 4 | 165.0 | - | 145.0 | 102.0 | 33.0 | 53.0 | 142.0 | 14.0 | 105.0 | 115.0 | 94.0 | - | 85.0 | 23 | 23.0 | 23.0 | 70.0 | 126.0 | 4.5 | 43.0 | 15.0 | |
| RDM5-400L/M/H RDM5-630S | 3 | 258.0 | 178.0 | 224.0 | 132.0 | 53.0 | 100.0 | 150.0 | 35.0 | 96.0 | 152.0 | 115.0 | 101.0 | 99.0 | 38 | 38.0 | 31.0 | 44.0 | 194.0 | 7.0 | 57.5 | 30.0 |
| 4 | 258.0 | 179.0 | 224.0 | 132.0 | 53.0 | 100.0 | 198.0 | 35.0 | 144.0 | 152.0 | 115.0 | 101.0 | 99.0 | 38 | 38.0 | 31.0 | 94.0 | 194.0 | 7.0 | 57.5 | 30.0 | |
| RDM5-630L/M/H | 3 | 270.0 | 185.0 | 235.5 | 146.0 | 52.5 | 100.0 | 182.0 | 35.5 | 116.0 | 158.0 | 119.0 | 106.0 | 103.0 | 45 | 43.0 | 41.0 | 58.0 | 200.0 | 7.0 | 58.0 | 32.0 |
| 4 | 270.0 | 185.0 | 235.5 | 146.0 | 52.5 | 100.0 | 240.0 | 35.5 | 174.0 | 158.0 | 119.0 | 106.0 | 103.0 | 45 | 43.0 | 41.0 | 116.0 | 200.0 | 7.0 | 58.0 | 31.5 | |
| RDM5-800L/M/H | 3 | 280.0 | 205.0 | 243.0 | 148.0 | 52.0 | 100.0 | 210.0 | 35.0 | 140.0 | 159.0 | 122.0 | 109.0 | 105.0 | 40.5 | 42.5 | 45.0 | 70.0 | 243.0 | 7.0 | 53.0 | 24.5 |
| 4 | 280.0 | 205.0 | 243.0 | 148.0 | 52.0 | 100.0 | 280.0 | 35.0 | 210.0 | 159.0 | 122.0 | 109.0 | 105.0 | 40.5 | 42.5 | 45.0 | 140.0 | 243.0 | 7.0 | 53.0 | 24.5 | |
| Cód méide | ||||
| (L11) | W3 | L9 | L10 | |
| RDM5-63L M RDM5-125S, L | 64 | 19 | 14 | 43 |
| RDM5-125M H RDM5-160S, LM | - | 23 | 24 | 40 |
| RDM5-250S.LMH | - | 23 | 30 | 44 |
| RDM5-400L, M, H RDM5-630S | - | 47 | 39 | 66 |
| RDM5-630L, M, H | - | 47 | 39 | 66 |
| RDM5-800L, M, H | - | 47 | 42 | 66 |
Méid oscailte painéil suiteála sreangaithe painéil chúl sraith RDM5
3 Chuaille 4 Chuaille
Cuma sreangaithe agus toisí suiteála painéil chúl sraith RDM5
RDM5- 125M/U 160,250 RDM5-400,630,800
Cuma sreangaithe cúil RDM5-125~800 agus méid oscailte pláta gléasta
| Múnla táirge | Cód méide | |||||||||
| H3 | H4 | D | W | L2 | d2 | A | B | C | d1 | |
| RDM5-125M H | 64 | 100 | M8 | 50 | 132 | 24 | 30 | 108 | 60 | 5.5 |
| RDM5-160L.M | ||||||||||
| RDM5-250L, M, H | 70 | 100 | M10 | 35 | 145 | 15 | 35 | 126 | 70 | 5.5 |
| RDM5-400L.M, H RDM5-630S | 71 | 105.5 | - | 48 | 2242 | 32 | 44 | 194 | 94 | 7 |
| RDM5-630L.M, H | 46 | 105 | - | 58 | 2346 | 37 | 58 | 200 | 116 | 7 |
| RDM5-800L,MH | 105 | 105 | - | 70 | 2436 | 48 | 70 | 243 | 70 | 7.5 |
Toisí painéil tosaigh breiseán sraith RDM5
Gléas cothrom
Toisí an bhriseoir ciorcaid painéil tosaigh breiseán RDM5-125~800
| Múnla táirge | Cód méide | |||||||||||||
| A | G | K | H | H | ₂ | Hs | L1 | L2 | AM | BM | ||||
| RDM5-125M H | 172 | 95 | 38.5 | 50.5 | 35 | 16.5 | 61 | 185 | 217 | M6 | M8 | |||
| RDM5-160L,M | ||||||||||||||
| RDM5-250L, M, H | 183 | 95 | 44 | 52 | 35 | 18 | 65 | 230 | 259 | M6 | M10 | |||
| RDM5-400L,M,H RDM5-630S | 276 | 170 | 53 | 79.5 | 67 | 18 | - | 322 | 352 | M6 | M10 | |||
| RDM5-630L,M,H | 299 | 163.5 | 67.5 | 84.5 | 65.5 | 20 | - | 368 | 397 | M8 | M12 | |||
| RDM5-80OL,M,H | 303 | 179 | 62 | 87.5 | 60.5 | 28 | 118 | 375 | 405 | M10 | M12 | |||
Méid an phoill sa phláta gléasta sreangaithe tosaigh breiseáin (is é X-XY-Y lár an bhriseoir ciorcaid)
Suiteáil bhíoma Gléas cothrom
Méid oscailte pláta gléasta sreangaithe tosaigh breiseán RDM5-125~800
| Múnla táirge | RDM5-125M.H RDM5-160L.M | RDM5-250L.M,H | RDM5-400L,M,H RDM5-630S | RDM5-630L,M,H | RDM5-800L,MH | |||||||||
| cuaille | 3 | 3 | 3 | 3 | 3 | |||||||||
| Méid oscailte an phláta gléasta (mm) | B | 66 | 70 | 115 | 90.5 | 90.5 | ||||||||
| B1 | 50 | 60 | - | - | 65 | |||||||||
| C | 60 | 64 | 135 | 144.5 | 144.5 | |||||||||
| C1 | 35 | 35 | - | - | 80 | |||||||||
| d | 6.5 | 6.5 | 6.5 | 8.5 | 11 | |||||||||
Toisí cúil phainéil breiseán sraith RDM5 agus toisí oscailte an phainéil gléasta
Toisí an bhriseoir ciorcaid painéil chúl breiseán RDM5-125~800
| Múnla táirge | Cód méide | ||||||||||
| A | F | G | K | H | H1 | H2 | H3 | H4 | AM | BM | |
| RDM5-125M H RDM5-160L M | 168 | 133 | 92 | 38 | 48 | 32.5 | 32.5 | 18 | 17 | M6 | M8 |
| RDM5-25OL, M, H | 186 | 144 | 95 | 45.5 | 49.5 | 33.5 | 34 | 15 | 17 | M6 | M8 |
| RDM5-400L, M, H RDM5-630S | 280 | 224 | 171 | 54.5 | 59.5 | 40 | 44 | 23.5 | 20 | M8 | M12 |
| RDM5-630L, M, H | 300 | 234 | 170 | 65 | 59 | 40 | 50 | 30 | 20 | M8 | M12 |
| RDM5-800L, M, H | 305 | 243 | 181 | 62 | 87 | 60 | - | - | 28 | M10 | M14 |
Méid an phoill sa phainéal suiteála sreangaithe breiseán cúil (is é X-XY-Y lár an bhriseoir ciorcaid)
Méid oscailte painéil suiteála sreangaithe cúil breiseán RDM5-125~800
| Múnla táirge | RDM5-125M.H RDMS-160L.M | RDM5-25OL,M,H | RDM5-400L, M, H RDM5-630S | RDM5-630L MH | RDM5-80OL. MH | |||||||
| cuaille | 3 | 4 | 3 | 4 | 3 | 4 | 3 | 4 | 3 | 4 | ||
| Méid oscailte an phláta gléasta (mm) | A | 91 | - | 107 | - | 149 | - | 182 | - | 210 | - | |
| A1 | - | 129 | - | 145 | - | 200 | - | 242 | - | 290 | ||
| B | 60 | - | 70 | - | 60 | - | 100 | - | 90 | - | ||
| B1 | - | 90 | - | 105 | - | 108 | - | 158 | - | 162 | ||
| C | 56 | 54 | 129 | 123 | 146 | |||||||
| D | 38 | 45.5 | 54.5 | 65 | 62 | |||||||
| E | 92 | 95 | 171 | 170 | 181 | |||||||
| d | 6.5 | 6.5 | 8.5 | 8.5 | 11 | |||||||
| Parafrása | ||
| 1 | Trádmharc | |
| 2 | Múnla táirge | |
| 3 | Paraiméadair Theicniúla | |
| 4 | Caighdeánach | |
| 5 | Marc Deimhniúcháin CCC | |
| 6 | Ainm na Cuideachta | |
| 7 | Láimhseáil | |
| 8 | Scriú críochfoirt | |
| 9 | Cnaipe turais | |
| 10 | Clúdach | |
| 11 | Clúdach lár | |
| 12 | Poill gléasta gabhálais | |
| 13 | Bonn | |
Uachtarach
Cásáil
Lár
Píosa
Íochtarach
Cásáil
Glacann an táirge dearadh inslithe dúbailte-chiseal chun sábháilteacht úsáideoirí a fheabhsú.
· Tá gá le cumas briseadh 6kA le linn tairisceana agus tairiscintí,
Ní féidir le 4.5kA freastal ar riachtanais na n-amanna a thuilleadh
· Cumas briste 6kA comhsheasmhach uile-shraith, feidhmíocht níos fearr
· Freastal ar riachtanais na gcustaiméirí maidir le cumas briseadh 50A agus 63A
· Tá an tomhaltas cumhachta i bhfad faoi bhun an cheanglais chaighdeáin náisiúnta
Cineál 63/100/125
>Comh-Aireachta Caighdeánach: Fad sábháilteachta mór >Comh-Aireachta Neamhchaighdeánach: Coigilt ar chostas an chomh-aireachta
An briseadh gearrchiorcaid rátáilte
Tá na ICS reatha 10ka níos airde ná an
RDM1 is airde an táirge traidisiúnta
cumas briste, rud a fhágann go héifeachtach
feabhsaíonn an táirge
feidhmíocht sábháilteachta agus comhlíonann sé na
éileamh ard ó chustaiméirí.
| Sruth rátáilte grád fráma l nm (A) | 63 | 125 | 160 | 250 | 400 | 630 | 800 | ||||||||||||||||||
| Reatha rátáilte ln (A) | 10,16,20,25,32,40,50,63 | 10,16,20,25,32,40,50,63,80,100,125 | 63,80,100,125,160 | 100,125,160,180,200,225,250 | 200,225,250,315,350,400 | 400,500,630 | 630,700,800 | ||||||||||||||||||
| Pol (P) | 2,3,4 | 3,4/2,3,4/3,4 | 3,4/2,3,4 | 3,4/2,3,4/3,4 | 3,4 | ||||||||||||||||||||
| Minicíocht rátáilte (Hz) | 50 | ||||||||||||||||||||||||
| Voltas inslithe rátáilte Ui (V) | AC1000 | ||||||||||||||||||||||||
| Voltas seasmhaíochta impulse rátáilte (V) | 12000 | ||||||||||||||||||||||||
| Voltas oibre rátáilte Ue (V) | 400V | AC400/AC690 | |||||||||||||||||||||||
| Fad stua (mm) | ≤50 | ≤50 | ≤50 | ≤50 | ≤100 | ≤100 | ≤100 | ||||||||||||||||||
| Cumas briseadh gearrchiorcaid | L | M | S | L | M | H | S | L | M | S | L | M | H | L | M | H | S | L | M | H | L | M | H | ||
| Teorainn Rátáilte/Cumas briste rátáilte lcu/lcs (AC400V) | 25/15 | 35/25 | 25/18 | 50/35 | 70/50 | 100/70 | 25/18 | 35/23 | 50/35 | 25/18 | 50/35 | 70/50 | 100/70 | 50/50 | 70/70 | 100/75 | 50/35 | 50/50 | 70/70 | 100/75 | 65/65 | 75/75 | 100/75 | ||
| Teorainn Rátáilte/Cumas briste rátáilte lcu/lcs (AC690V) | / | / | / | 20/10. | 20/12. | 30/15. | / | 10/5. | 15/8. | / | 20/10. | 20/12. | 30/15 | 20/10. | 25/15 | 35/18 | / | 20/10. | 25/15 | 35/18 | 20/10. | 25/15 | 35/20 | ||
| Úsáid catagóir | A | ||||||||||||||||||||||||
| Comhlíontach le caighdeáin | IEC60947-2 GB/T14048-2 | ||||||||||||||||||||||||
| Oiriúnach do theocht an chomhshaoil oibre | -5℃+40℃ | ||||||||||||||||||||||||
| Saol leictreach (uaireanta) | 8000 | 7500 | |||||||||||||||||||||||
| Saol meicniúil (uaireanta) | 20000 | 20000 | 20000 | 20000 | 10000 | 10000 | 10000 | ||||||||||||||||||
| Scaoileadh shunt | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ||||||||||||||||||
| Scaoileadh faoi-voltais | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ||||||||||||||||||
| Teagmháil aláraim | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ||||||||||||||||||
| Teagmháil chúnta | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ||||||||||||||||||
2 pholl 3 pholl
4 cuaille Taobh
| Múnla táirge | Pol | Sreangú painéil tosaigh | Méid suiteála | Seasamh an chnaipe | ||||||||||||||||||
| L1 | L2 | L3 | L4 | L5 | L6 | W1 | W2 | W3 | H1 | H2 | H3 | H4 | H5 | H6 | K | a | b | d | L7 | L8 | ||
| RDM5-63L/M RDM5-125S/L | 2 | 130.0 | - | 116.5 | 85.0 | - | 49.5 | 50.0 | 11.0 | 25.0 | 83.0 | 71.0 | - | 57.0 | 24.5 | 24.5 | 18.5 | - | 111.0 | 3.5 | 17.0 | 20.0 |
| 3 | 130.0 | - | 116.5 | 85.0 | - | 49.5 | 75.0 | 11.0 | 50.0 | 83.0 | 71.0 | - | 57.0 | 24.5 | 24.5 | 18.5 | 25.0 | 111.0 | 3.5 | 16.5 | 20.0 | |
| 4 | 130.0 | - | 116.5 | 85.0 | - | 49.5 | 100.0 | 11.0 | 75.0 | 83.0 | 71.0 | - | 57.0 | 24.5 | 24.5 | 18.5 | 50.0 | 111.0 | 3.5 | 16.5 | 20.0 | |
| RDM5-125M/U | 2 | 152.0 | - | 132.0 | 88.0 | 31.0 | 52.0 | 62 | 14.5 | 30.0 | 109.5 | 96.0 | - | 82.0 | 28.5 | 28.5 | 18.0 | - | 129.0 | 4.5 | - | 6.5 |
| 3 | 152.0 | - | 132.0 | 88.0 | 31.0 | 52.0 | 92 | 14.5 | 60.0 | 110.0 | 96.0 | - | 82.0 | 28.5 | 28.5 | 18.0 | 30.0 | 129.0 | 4.5 | 22.0 | 15.5 | |
| 4 | 152.0 | - | 132.0 | 88.0 | 31.0 | 65.0 | 122.0 | 14.5 | 90.0 | 110.0 | 96.0 | - | 82.0 | 28.5 | 28.5 | 18.0 | 60.0 | 129.0 | 4.5 | 22.0 | 16.5 | |
| RDM5-160S/L/M | 2 | 150.0 | - | 133.0 | 88.0 | 31.0 | 52.0 | 62 | 14.5 | 30.0 | 93.0 | 79.0 | - | 65.0 | 23.5 | 23.5 | 22.0 | - | 129.0 | 3.5 | - | 16.5 |
| 3 | 150.0 | - | 133.0 | 88.0 | 31.0 | 52.0 | 92 | 14.5 | 60.0 | 93.0 | 79.0 | - | 65.0 | 23.5 | 23.5 | 22.0 | 30.0 | 129.0 | 3.5 | 22.0 | 15.5 | |
| 4 | 150.0 | - | 133.0 | 88.0 | 31.0 | 52.0 | 122.0 | 14.5 | 90.0 | 93.0 | 79.0 | - | 65.0 | 23.5 | 23.5 | 22.0 | 60.0 | 129.0 | 3.5 | 22.0 | 16.5 | |
| RDM5-250S/L | 2 | 165.0 | - | 145.5 | 102.0 | 33.0 | 53.0 | 75.0 | 14.0 | 35.0 | 96.0 | 76.0 | - | 67.0 | 23 | 23.0 | 25.0 | - | 126.0 | 4.5 | 2.5 | 15.5 |
| 3 | 165.0 | - | 145.5 | 102.0 | 33.0 | 53.0 | 107.0 | 14.0 | 70.0 | 96.0 | 76.0 | - | 67.0 | 23 | 23.0 | 25.0 | 35.0 | 126.0 | 4.5 | 42.5 | 5.5 | |
| 4 | 165.0 | - | 145.5 | 102.0 | 33.0 | 53.0 | 142.0 | 14.0 | 105.0 | 96.0 | 76.0 | - | 67.0 | 23 | 23.0 | 25.0 | 70.0 | 126.0 | 4.5 | 43.0 | 15.5 | |
| RDM5-250M/U | 2 | 165.0 | - | 145.0 | 102.0 | 53.0 | 53.0 | 75.0 | 14.0 | 55.0 | 112.5 | 94.0 | - | 85.0 | 22 | 22.0 | 24.0 | - | 126.0 | 4.5 | 2.5 | 15.5 |
| 3 | 165.0 | - | 145.0 | 102.0 | 33.0 | 53.0 | 107.0 | 14.0 | 70.0 | 115.0 | 94.0 | - | 85.0 | 23 | 23.0 | 23.0 | 35.0 | 126.0 | 4.5 | 42.5 | 15.5 | |
| 4 | 165.0 | - | 145.0 | 102.0 | 33.0 | 53.0 | 142.0 | 14.0 | 105.0 | 115.0 | 94.0 | - | 85.0 | 23 | 23.0 | 23.0 | 70.0 | 126.0 | 4.5 | 43.0 | 15.0 | |
| RDM5-400L/M/H RDM5-630S | 3 | 258.0 | 178.0 | 224.0 | 132.0 | 53.0 | 100.0 | 150.0 | 35.0 | 96.0 | 152.0 | 115.0 | 101.0 | 99.0 | 38 | 38.0 | 31.0 | 44.0 | 194.0 | 7.0 | 57.5 | 30.0 |
| 4 | 258.0 | 179.0 | 224.0 | 132.0 | 53.0 | 100.0 | 198.0 | 35.0 | 144.0 | 152.0 | 115.0 | 101.0 | 99.0 | 38 | 38.0 | 31.0 | 94.0 | 194.0 | 7.0 | 57.5 | 30.0 | |
| RDM5-630L/M/H | 3 | 270.0 | 185.0 | 235.5 | 146.0 | 52.5 | 100.0 | 182.0 | 35.5 | 116.0 | 158.0 | 119.0 | 106.0 | 103.0 | 45 | 43.0 | 41.0 | 58.0 | 200.0 | 7.0 | 58.0 | 32.0 |
| 4 | 270.0 | 185.0 | 235.5 | 146.0 | 52.5 | 100.0 | 240.0 | 35.5 | 174.0 | 158.0 | 119.0 | 106.0 | 103.0 | 45 | 43.0 | 41.0 | 116.0 | 200.0 | 7.0 | 58.0 | 31.5 | |
| RDM5-800L/M/H | 3 | 280.0 | 205.0 | 243.0 | 148.0 | 52.0 | 100.0 | 210.0 | 35.0 | 140.0 | 159.0 | 122.0 | 109.0 | 105.0 | 40.5 | 42.5 | 45.0 | 70.0 | 243.0 | 7.0 | 53.0 | 24.5 |
| 4 | 280.0 | 205.0 | 243.0 | 148.0 | 52.0 | 100.0 | 280.0 | 35.0 | 210.0 | 159.0 | 122.0 | 109.0 | 105.0 | 40.5 | 42.5 | 45.0 | 140.0 | 243.0 | 7.0 | 53.0 | 24.5 | |
| Cód méide | ||||
| (L11) | W3 | L9 | L10 | |
| RDM5-63L M RDM5-125S, L | 64 | 19 | 14 | 43 |
| RDM5-125M H RDM5-160S, LM | - | 23 | 24 | 40 |
| RDM5-250S.LMH | - | 23 | 30 | 44 |
| RDM5-400L, M, H RDM5-630S | - | 47 | 39 | 66 |
| RDM5-630L, M, H | - | 47 | 39 | 66 |
| RDM5-800L, M, H | - | 47 | 42 | 66 |
Méid oscailte painéil suiteála sreangaithe painéil chúl sraith RDM5
3 Chuaille 4 Chuaille
Cuma sreangaithe agus toisí suiteála painéil chúl sraith RDM5
RDM5- 125M/U 160,250 RDM5-400,630,800
Cuma sreangaithe cúil RDM5-125~800 agus méid oscailte pláta gléasta
| Múnla táirge | Cód méide | |||||||||
| H3 | H4 | D | W | L2 | d2 | A | B | C | d1 | |
| RDM5-125M H | 64 | 100 | M8 | 50 | 132 | 24 | 30 | 108 | 60 | 5.5 |
| RDM5-160L.M | ||||||||||
| RDM5-250L, M, H | 70 | 100 | M10 | 35 | 145 | 15 | 35 | 126 | 70 | 5.5 |
| RDM5-400L.M, H RDM5-630S | 71 | 105.5 | - | 48 | 2242 | 32 | 44 | 194 | 94 | 7 |
| RDM5-630L.M, H | 46 | 105 | - | 58 | 2346 | 37 | 58 | 200 | 116 | 7 |
| RDM5-800L,MH | 105 | 105 | - | 70 | 2436 | 48 | 70 | 243 | 70 | 7.5 |
Toisí painéil tosaigh breiseán sraith RDM5
Gléas cothrom
Toisí an bhriseoir ciorcaid painéil tosaigh breiseán RDM5-125~800
| Múnla táirge | Cód méide | |||||||||||||
| A | G | K | H | H | ₂ | Hs | L1 | L2 | AM | BM | ||||
| RDM5-125M H | 172 | 95 | 38.5 | 50.5 | 35 | 16.5 | 61 | 185 | 217 | M6 | M8 | |||
| RDM5-160L,M | ||||||||||||||
| RDM5-250L, M, H | 183 | 95 | 44 | 52 | 35 | 18 | 65 | 230 | 259 | M6 | M10 | |||
| RDM5-400L,M,H RDM5-630S | 276 | 170 | 53 | 79.5 | 67 | 18 | - | 322 | 352 | M6 | M10 | |||
| RDM5-630L,M,H | 299 | 163.5 | 67.5 | 84.5 | 65.5 | 20 | - | 368 | 397 | M8 | M12 | |||
| RDM5-80OL,M,H | 303 | 179 | 62 | 87.5 | 60.5 | 28 | 118 | 375 | 405 | M10 | M12 | |||
Méid an phoill sa phláta gléasta sreangaithe tosaigh breiseáin (is é X-XY-Y lár an bhriseoir ciorcaid)
Suiteáil bhíoma Gléas cothrom
Méid oscailte pláta gléasta sreangaithe tosaigh breiseán RDM5-125~800
| Múnla táirge | RDM5-125M.H RDM5-160L.M | RDM5-250L.M,H | RDM5-400L,M,H RDM5-630S | RDM5-630L,M,H | RDM5-800L,MH | |||||||||
| cuaille | 3 | 3 | 3 | 3 | 3 | |||||||||
| Méid oscailte an phláta gléasta (mm) | B | 66 | 70 | 115 | 90.5 | 90.5 | ||||||||
| B1 | 50 | 60 | - | - | 65 | |||||||||
| C | 60 | 64 | 135 | 144.5 | 144.5 | |||||||||
| C1 | 35 | 35 | - | - | 80 | |||||||||
| d | 6.5 | 6.5 | 6.5 | 8.5 | 11 | |||||||||
Toisí cúil phainéil breiseán sraith RDM5 agus toisí oscailte an phainéil gléasta
Toisí an bhriseoir ciorcaid painéil chúl breiseán RDM5-125~800
| Múnla táirge | Cód méide | ||||||||||
| A | F | G | K | H | H1 | H2 | H3 | H4 | AM | BM | |
| RDM5-125M H RDM5-160L M | 168 | 133 | 92 | 38 | 48 | 32.5 | 32.5 | 18 | 17 | M6 | M8 |
| RDM5-25OL, M, H | 186 | 144 | 95 | 45.5 | 49.5 | 33.5 | 34 | 15 | 17 | M6 | M8 |
| RDM5-400L, M, H RDM5-630S | 280 | 224 | 171 | 54.5 | 59.5 | 40 | 44 | 23.5 | 20 | M8 | M12 |
| RDM5-630L, M, H | 300 | 234 | 170 | 65 | 59 | 40 | 50 | 30 | 20 | M8 | M12 |
| RDM5-800L, M, H | 305 | 243 | 181 | 62 | 87 | 60 | - | - | 28 | M10 | M14 |
Méid an phoill sa phainéal suiteála sreangaithe breiseán cúil (is é X-XY-Y lár an bhriseoir ciorcaid)
Méid oscailte painéil suiteála sreangaithe cúil breiseán RDM5-125~800
| Múnla táirge | RDM5-125M.H RDMS-160L.M | RDM5-25OL,M,H | RDM5-400L, M, H RDM5-630S | RDM5-630L MH | RDM5-80OL. MH | |||||||
| cuaille | 3 | 4 | 3 | 4 | 3 | 4 | 3 | 4 | 3 | 4 | ||
| Méid oscailte an phláta gléasta (mm) | A | 91 | - | 107 | - | 149 | - | 182 | - | 210 | - | |
| A1 | - | 129 | - | 145 | - | 200 | - | 242 | - | 290 | ||
| B | 60 | - | 70 | - | 60 | - | 100 | - | 90 | - | ||
| B1 | - | 90 | - | 105 | - | 108 | - | 158 | - | 162 | ||
| C | 56 | 54 | 129 | 123 | 146 | |||||||
| D | 38 | 45.5 | 54.5 | 65 | 62 | |||||||
| E | 92 | 95 | 171 | 170 | 181 | |||||||
| d | 6.5 | 6.5 | 8.5 | 8.5 | 11 | |||||||
