Tá áthas orainn go bhfuil tóir thar a bheith ard i measc ár gcustaiméirí as ár gcáilíocht iontach táirgí, ár bpraghas iomaíoch agus ár seirbhís den scoth do Tháirgí Pearsantaithe, Ceadú CE MCCB RDM5-250L. Is é ár gcuspóir cabhrú le custaiméirí a gcuid spriocanna a thuiscint. Táimid ag déanamh iarrachtaí iontacha chun an bua-bua seo a bhaint amach agus cuirimid fáilte chroíúil romhat páirt a ghlacadh linn!
Tá áthas orainn go bhfuil tóir thar a bheith ard i measc ár gcustaiméirí as ár dtáirge iontach ardchaighdeáin, ár bpraghas iomaíoch chomh maith le seirbhís iontach.MCCB agus Briseoir Ciorcaid na SíneGlacaimid le trealamh agus teicneolaíocht táirgthe chun cinn, agus trealamh agus modhanna tástála foirfe chun cáilíocht ár dtáirgí a chinntiú. Leis an gcumas ardleibhéil atá againn, an bhainistíocht eolaíoch, na foirne den scoth, agus an tseirbhís aireach atá againn, is fearr lenár réitigh i measc custaiméirí baile agus eachtrannacha. Le do thacaíocht, tógfaimid todhchaí níos fearr!
Cuirtear briseoir ciorcaid mhúnlaithe sraith RDM5 i bhfeidhm ar chiorcad AC 50HZ, voltas inslithe 1000V, voltas oibre rátáilte suas le 690V, sruth rátáilte suas le 800A, a dháileann an chumhacht agus a chosnaíonn an ciorcad agus an fhoinse cumhachta i gcoinne ró-ualaigh, gearrchiorcad agus damáiste faoi bhun voltais. Go háirithe, nuair a bhíonn an sruth níos ísle ná 630A, is féidir leis an mótar a chosaint freisin. De ghnáth is annamh a bhíonn an briseoir inbhéartaithe agus ag tosú an mhótair. Is féidir an táirge a shuiteáil go hingearach agus go cothrománach.
1. Dearadh Dí-chomhthionóil Modúlach Painéil
2. Dearadh gabhálais boscaithe, suiteáil éasca
3. Cumas Briste Deiridh
4. Méid Dlúth
5. Tá an sruth briste gearrchiorcaid rátáilte Ics 10ka níos airde ná an cumas briste is airde atá ag an táirge traidisiúnta RDM1.
6. Saolré seirbhíse marthanach RDM5 Tá áthas orainn as an tóir atá orainn i measc ár gcustaiméirí as ár gcáilíocht iontach táirgí, ár bpraghas iomaíoch agus ár seirbhís den scoth do Tháirgí Pearsantaithe, Ceadú CE MCCB RDM5-250L. Is é ár gcuspóir cabhrú le custaiméirí a gcuid spriocanna a thuiscint. Táimid ag déanamh iarrachtaí iontacha chun an bua-bua seo a bhaint amach agus cuirimid fáilte chroíúil romhat páirt a ghlacadh linn!
Táirgí PearsantaitheMCCB agus Briseoir Ciorcaid na SíneGlacaimid le trealamh agus teicneolaíocht táirgthe chun cinn, agus trealamh agus modhanna tástála foirfe chun cáilíocht ár dtáirgí a chinntiú. Leis an gcumas ardleibhéil atá againn, an bhainistíocht eolaíoch, na foirne den scoth, agus an tseirbhís aireach atá againn, is fearr lenár réitigh i measc custaiméirí baile agus eachtrannacha. Le do thacaíocht, tógfaimid todhchaí níos fearr!
| Sruth rátáilte grád fráma l nm (A) | 63 | 125 | 160 | 250 | 400 | 630 | 800 | ||||||||||||||||||
| Reatha rátáilte ln (A) | 10,16,20,25,32,40,50,63 | 10,16,20,25,32,40,50,63,80,100,125 | 63,80,100,125,160 | 100,125,160,180,200,225,250 | 200,225,250,315,350,400 | 400,500,630 | 630,700,800 | ||||||||||||||||||
| Pol (P) | 2,3,4 | 3,4/2,3,4/3,4 | 3,4/2,3,4 | 3,4/2,3,4/3,4 | 3,4 | ||||||||||||||||||||
| Minicíocht rátáilte (Hz) | 50 | ||||||||||||||||||||||||
| Voltas inslithe rátáilte Ui (V) | AC1000 | ||||||||||||||||||||||||
| Voltas seasmhaíochta impulse rátáilte (V) | 12000 | ||||||||||||||||||||||||
| Voltas oibre rátáilte Ue (V) | 400V | AC400/AC690 | |||||||||||||||||||||||
| Fad stua (mm) | ≤50 | ≤50 | ≤50 | ≤50 | ≤100 | ≤100 | ≤100 | ||||||||||||||||||
| Cumas briseadh gearrchiorcaid | L | M | S | L | M | H | S | L | M | S | L | M | H | L | M | H | S | L | M | H | L | M | H | ||
| Teorainn Rátáilte/Cumas briste rátáilte lcu/lcs (AC400V) | 25/15 | 35/25 | 25/18 | 50/35 | 70/50 | 100/70 | 25/18 | 35/23 | 50/35 | 25/18 | 50/35 | 70/50 | 100/70 | 50/50 | 70/70 | 100/75 | 50/35 | 50/50 | 70/70 | 100/75 | 65/65 | 75/75 | 100/75 | ||
| Teorainn Rátáilte/Cumas briste rátáilte lcu/lcs (AC690V) | / | / | / | 20/10. | 20/12. | 30/15. | / | 10/5. | 15/8. | / | 20/10. | 20/12. | 30/15 | 20/10. | 25/15 | 35/18 | / | 20/10. | 25/15 | 35/18 | 20/10. | 25/15 | 35/20 | ||
| Úsáid catagóir | A | ||||||||||||||||||||||||
| Comhlíontach le caighdeáin | IEC60947-2 GB/T14048-2 | ||||||||||||||||||||||||
| Oiriúnach do theocht an chomhshaoil oibre | -5℃+40℃ | ||||||||||||||||||||||||
| Saol leictreach (uaireanta) | 8000 | 7500 | |||||||||||||||||||||||
| Saol meicniúil (uaireanta) | 20000 | 20000 | 20000 | 20000 | 10000 | 10000 | 10000 | ||||||||||||||||||
| Scaoileadh shunt | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ||||||||||||||||||
| Scaoileadh faoi-voltais | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ||||||||||||||||||
| Teagmháil aláraim | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ||||||||||||||||||
| Teagmháil chúnta | ■ | ■ | ■ | ■ | ■ | ■ | ■ | ||||||||||||||||||
2 pholl 3 pholl
4 cuaille Taobh
| Múnla táirge | Pol | Sreangú painéil tosaigh | Méid suiteála | Seasamh an chnaipe | ||||||||||||||||||
| L1 | L2 | L3 | L4 | L5 | L6 | W1 | W2 | W3 | H1 | H2 | H3 | H4 | H5 | H6 | K | a | b | d | L7 | L8 | ||
| RDM5-63L/M RDM5-125S/L | 2 | 130.0 | - | 116.5 | 85.0 | - | 49.5 | 50.0 | 11.0 | 25.0 | 83.0 | 71.0 | - | 57.0 | 24.5 | 24.5 | 18.5 | - | 111.0 | 3.5 | 17.0 | 20.0 |
| 3 | 130.0 | - | 116.5 | 85.0 | - | 49.5 | 75.0 | 11.0 | 50.0 | 83.0 | 71.0 | - | 57.0 | 24.5 | 24.5 | 18.5 | 25.0 | 111.0 | 3.5 | 16.5 | 20.0 | |
| 4 | 130.0 | - | 116.5 | 85.0 | - | 49.5 | 100.0 | 11.0 | 75.0 | 83.0 | 71.0 | - | 57.0 | 24.5 | 24.5 | 18.5 | 50.0 | 111.0 | 3.5 | 16.5 | 20.0 | |
| RDM5-125M/U | 2 | 152.0 | - | 132.0 | 88.0 | 31.0 | 52.0 | 62 | 14.5 | 30.0 | 109.5 | 96.0 | - | 82.0 | 28.5 | 28.5 | 18.0 | - | 129.0 | 4.5 | - | 6.5 |
| 3 | 152.0 | - | 132.0 | 88.0 | 31.0 | 52.0 | 92 | 14.5 | 60.0 | 110.0 | 96.0 | - | 82.0 | 28.5 | 28.5 | 18.0 | 30.0 | 129.0 | 4.5 | 22.0 | 15.5 | |
| 4 | 152.0 | - | 132.0 | 88.0 | 31.0 | 65.0 | 122.0 | 14.5 | 90.0 | 110.0 | 96.0 | - | 82.0 | 28.5 | 28.5 | 18.0 | 60.0 | 129.0 | 4.5 | 22.0 | 16.5 | |
| RDM5-160S/L/M | 2 | 150.0 | - | 133.0 | 88.0 | 31.0 | 52.0 | 62 | 14.5 | 30.0 | 93.0 | 79.0 | - | 65.0 | 23.5 | 23.5 | 22.0 | - | 129.0 | 3.5 | - | 16.5 |
| 3 | 150.0 | - | 133.0 | 88.0 | 31.0 | 52.0 | 92 | 14.5 | 60.0 | 93.0 | 79.0 | - | 65.0 | 23.5 | 23.5 | 22.0 | 30.0 | 129.0 | 3.5 | 22.0 | 15.5 | |
| 4 | 150.0 | - | 133.0 | 88.0 | 31.0 | 52.0 | 122.0 | 14.5 | 90.0 | 93.0 | 79.0 | - | 65.0 | 23.5 | 23.5 | 22.0 | 60.0 | 129.0 | 3.5 | 22.0 | 16.5 | |
| RDM5-250S/L | 2 | 165.0 | - | 145.5 | 102.0 | 33.0 | 53.0 | 75.0 | 14.0 | 35.0 | 96.0 | 76.0 | - | 67.0 | 23 | 23.0 | 25.0 | - | 126.0 | 4.5 | 2.5 | 15.5 |
| 3 | 165.0 | - | 145.5 | 102.0 | 33.0 | 53.0 | 107.0 | 14.0 | 70.0 | 96.0 | 76.0 | - | 67.0 | 23 | 23.0 | 25.0 | 35.0 | 126.0 | 4.5 | 42.5 | 5.5 | |
| 4 | 165.0 | - | 145.5 | 102.0 | 33.0 | 53.0 | 142.0 | 14.0 | 105.0 | 96.0 | 76.0 | - | 67.0 | 23 | 23.0 | 25.0 | 70.0 | 126.0 | 4.5 | 43.0 | 15.5 | |
| RDM5-250M/U | 2 | 165.0 | - | 145.0 | 102.0 | 53.0 | 53.0 | 75.0 | 14.0 | 55.0 | 112.5 | 94.0 | - | 85.0 | 22 | 22.0 | 24.0 | - | 126.0 | 4.5 | 2.5 | 15.5 |
| 3 | 165.0 | - | 145.0 | 102.0 | 33.0 | 53.0 | 107.0 | 14.0 | 70.0 | 115.0 | 94.0 | - | 85.0 | 23 | 23.0 | 23.0 | 35.0 | 126.0 | 4.5 | 42.5 | 15.5 | |
| 4 | 165.0 | - | 145.0 | 102.0 | 33.0 | 53.0 | 142.0 | 14.0 | 105.0 | 115.0 | 94.0 | - | 85.0 | 23 | 23.0 | 23.0 | 70.0 | 126.0 | 4.5 | 43.0 | 15.0 | |
| RDM5-400L/M/H RDM5-630S | 3 | 258.0 | 178.0 | 224.0 | 132.0 | 53.0 | 100.0 | 150.0 | 35.0 | 96.0 | 152.0 | 115.0 | 101.0 | 99.0 | 38 | 38.0 | 31.0 | 44.0 | 194.0 | 7.0 | 57.5 | 30.0 |
| 4 | 258.0 | 179.0 | 224.0 | 132.0 | 53.0 | 100.0 | 198.0 | 35.0 | 144.0 | 152.0 | 115.0 | 101.0 | 99.0 | 38 | 38.0 | 31.0 | 94.0 | 194.0 | 7.0 | 57.5 | 30.0 | |
| RDM5-630L/M/H | 3 | 270.0 | 185.0 | 235.5 | 146.0 | 52.5 | 100.0 | 182.0 | 35.5 | 116.0 | 158.0 | 119.0 | 106.0 | 103.0 | 45 | 43.0 | 41.0 | 58.0 | 200.0 | 7.0 | 58.0 | 32.0 |
| 4 | 270.0 | 185.0 | 235.5 | 146.0 | 52.5 | 100.0 | 240.0 | 35.5 | 174.0 | 158.0 | 119.0 | 106.0 | 103.0 | 45 | 43.0 | 41.0 | 116.0 | 200.0 | 7.0 | 58.0 | 31.5 | |
| RDM5-800L/M/H | 3 | 280.0 | 205.0 | 243.0 | 148.0 | 52.0 | 100.0 | 210.0 | 35.0 | 140.0 | 159.0 | 122.0 | 109.0 | 105.0 | 40.5 | 42.5 | 45.0 | 70.0 | 243.0 | 7.0 | 53.0 | 24.5 |
| 4 | 280.0 | 205.0 | 243.0 | 148.0 | 52.0 | 100.0 | 280.0 | 35.0 | 210.0 | 159.0 | 122.0 | 109.0 | 105.0 | 40.5 | 42.5 | 45.0 | 140.0 | 243.0 | 7.0 | 53.0 | 24.5 | |
| Cód méide | ||||
| (L11) | W3 | L9 | L10 | |
| RDM5-63L M RDM5-125S, L | 64 | 19 | 14 | 43 |
| RDM5-125M H RDM5-160S, LM | - | 23 | 24 | 40 |
| RDM5-250S.LMH | - | 23 | 30 | 44 |
| RDM5-400L, M, H RDM5-630S | - | 47 | 39 | 66 |
| RDM5-630L, M, H | - | 47 | 39 | 66 |
| RDM5-800L, M, H | - | 47 | 42 | 66 |
Méid oscailte painéil suiteála sreangaithe painéil chúl sraith RDM5
3 Chuaille 4 Chuaille
Cuma sreangaithe agus toisí suiteála painéil chúl sraith RDM5
RDM5- 125M/U 160,250 RDM5-400,630,800
Cuma sreangaithe cúil RDM5-125~800 agus méid oscailte pláta gléasta
| Múnla táirge | Cód méide | |||||||||
| H3 | H4 | D | W | L2 | d2 | A | B | C | d1 | |
| RDM5-125M H | 64 | 100 | M8 | 50 | 132 | 24 | 30 | 108 | 60 | 5.5 |
| RDM5-160L.M | ||||||||||
| RDM5-250L, M, H | 70 | 100 | M10 | 35 | 145 | 15 | 35 | 126 | 70 | 5.5 |
| RDM5-400L.M, H RDM5-630S | 71 | 105.5 | - | 48 | 2242 | 32 | 44 | 194 | 94 | 7 |
| RDM5-630L.M, H | 46 | 105 | - | 58 | 2346 | 37 | 58 | 200 | 116 | 7 |
| RDM5-800L,MH | 105 | 105 | - | 70 | 2436 | 48 | 70 | 243 | 70 | 7.5 |
Toisí painéil tosaigh breiseán sraith RDM5
Gléas cothrom
Toisí an bhriseoir ciorcaid painéil tosaigh breiseán RDM5-125~800
| Múnla táirge | Cód méide | |||||||||||||
| A | G | K | H | H | ₂ | Hs | L1 | L2 | AM | BM | ||||
| RDM5-125M H | 172 | 95 | 38.5 | 50.5 | 35 | 16.5 | 61 | 185 | 217 | M6 | M8 | |||
| RDM5-160L,M | ||||||||||||||
| RDM5-250L, M, H | 183 | 95 | 44 | 52 | 35 | 18 | 65 | 230 | 259 | M6 | M10 | |||
| RDM5-400L,M,H RDM5-630S | 276 | 170 | 53 | 79.5 | 67 | 18 | - | 322 | 352 | M6 | M10 | |||
| RDM5-630L,M,H | 299 | 163.5 | 67.5 | 84.5 | 65.5 | 20 | - | 368 | 397 | M8 | M12 | |||
| RDM5-80OL,M,H | 303 | 179 | 62 | 87.5 | 60.5 | 28 | 118 | 375 | 405 | M10 | M12 | |||
Méid an phoill sa phláta gléasta sreangaithe tosaigh breiseáin (is é X-XY-Y lár an bhriseoir ciorcaid)
Suiteáil bhíoma Gléas cothrom
Méid oscailte pláta gléasta sreangaithe tosaigh breiseán RDM5-125~800
| Múnla táirge | RDM5-125M.H RDM5-160L.M | RDM5-250L.M,H | RDM5-400L,M,H RDM5-630S | RDM5-630L,M,H | RDM5-800L,MH | |||||||||
| cuaille | 3 | 3 | 3 | 3 | 3 | |||||||||
| Méid oscailte an phláta gléasta (mm) | B | 66 | 70 | 115 | 90.5 | 90.5 | ||||||||
| B1 | 50 | 60 | - | - | 65 | |||||||||
| C | 60 | 64 | 135 | 144.5 | 144.5 | |||||||||
| C1 | 35 | 35 | - | - | 80 | |||||||||
| d | 6.5 | 6.5 | 6.5 | 8.5 | 11 | |||||||||
Toisí cúil phainéil breiseán sraith RDM5 agus toisí oscailte an phainéil gléasta
Toisí an bhriseoir ciorcaid painéil chúl breiseán RDM5-125~800
| Múnla táirge | Cód méide | ||||||||||
| A | F | G | K | H | H1 | H2 | H3 | H4 | AM | BM | |
| RDM5-125M H RDM5-160L M | 168 | 133 | 92 | 38 | 48 | 32.5 | 32.5 | 18 | 17 | M6 | M8 |
| RDM5-25OL, M, H | 186 | 144 | 95 | 45.5 | 49.5 | 33.5 | 34 | 15 | 17 | M6 | M8 |
| RDM5-400L, M, H RDM5-630S | 280 | 224 | 171 | 54.5 | 59.5 | 40 | 44 | 23.5 | 20 | M8 | M12 |
| RDM5-630L, M, H | 300 | 234 | 170 | 65 | 59 | 40 | 50 | 30 | 20 | M8 | M12 |
| RDM5-800L, M, H | 305 | 243 | 181 | 62 | 87 | 60 | - | - | 28 | M10 | M14 |
Méid an phoill sa phainéal suiteála sreangaithe breiseán cúil (is é X-XY-Y lár an bhriseoir ciorcaid)
Méid oscailte painéil suiteála sreangaithe cúil breiseán RDM5-125~800
| Múnla táirge | RDM5-125M.H RDMS-160L.M | RDM5-25OL,M,H | RDM5-400L, M, H RDM5-630S | RDM5-630L MH | RDM5-80OL. MH | |||||||
| cuaille | 3 | 4 | 3 | 4 | 3 | 4 | 3 | 4 | 3 | 4 | ||
| Méid oscailte an phláta gléasta (mm) | A | 91 | - | 107 | - | 149 | - | 182 | - | 210 | - | |
| A1 | - | 129 | - | 145 | - | 200 | - | 242 | - | 290 | ||
| B | 60 | - | 70 | - | 60 | - | 100 | - | 90 | - | ||
| B1 | - | 90 | - | 105 | - | 108 | - | 158 | - | 162 | ||
| C | 56 | 54 | 129 | 123 | 146 | |||||||
| D | 38 | 45.5 | 54.5 | 65 | 62 | |||||||
| E | 92 | 95 | 171 | 170 | 181 | |||||||
| d | 6.5 | 6.5 | 8.5 | 8.5 | 11 | |||||||
